This HP Deskjet D5560/D5563 Printer Manual is published by HP, without any warranty.
To connect the HP Printer to an integrated wireless WLAN 802.11 network, you will need the following:
* A wireless 802.11 network that includes a wireless router or access point. If you connect the HP Printer on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).
* A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP Printer on.
* Network name (SSID).
* WEP key or WPA Passphrase (if needed).
To connect the product
1. Insert the product Software CD in the computer CD-ROM drive.
2. Follow the instructions on the screen. When you are prompted, connect the product to the computer using the USB setup cable included in the box. The product will attempt to connect to the network. If the connection fails, follow the prompts to correct the problem, and then try again.
3. When the setup is finished, you will be prompted to disconnect the USB cable and test the wireless network connection. Once the product connects successfully to the network, install the software on each computer that will use the product over the network.
This printer manual provides details about how to use HP Deskjet D5560/D5563 Printer and to resolve problems.
This printer manual may be made without notice by HP at any time. For more information on HP printer, please visit HP.